Roor Production in Germany Discontinued: What Happens Now with Your Roor Bong

The news has deeply affected many in the German and international bong culture: Roor, one of the most renowned manufacturers of high-quality glass bongs, has ceased production in Germany under its previous company name Vorsicht Glas GmbH after almost 30 years. A name, or rather Vorsicht Glas GmbH, which for a long time stood for good craftsmanship and German glassblowing art in the scene, is thus temporarily withdrawing from its production location in Germany. This raises the question for many users: What happens to my Roor bong if it gets damaged?

We at EHLE share the regret over the end of this glass manufactory. Roor Germany, or Vorsicht Glas GmbH, was more than just a manufacturer; Roor was a friend and for many a valued colleague in the world of artistic glassblowing. But even if one door closes, we want to help ensure that the legacy and joy of these special glass pieces live on.

What you can expect in this article: You will learn everything about Roor's history, the possible reasons for the end of production in Germany, and – most importantly – how EHLE can help you preserve and continue to enjoy your valuable Roor bong through our professional repair service.________________________________________

The History of Roor – Craftsmanship from Frankenthal

To understand why the closure of Roor (or Vorsicht Glas GmbH) has moved so many, it's worth taking a look back. Since its founding in the early 1990s by Martin Birzle in Frankenthal, Germany, the name Roor has stood for a high standard of quality. The basis for this has always been the durable and heat-resistant borosilicate glass (Type 3.3), which is also used in laboratory technology.

Roor products were characterized by clean workmanship, clear shapes, and often individual elements – from precision joints to colored accents or special models. For many users, Roor bongs were considered reliable everyday devices and at the same time high-quality glass products with a certain recognition value. The brand became an integral part of the scene over the years – both in Germany and internationally.

The End of Roor – Why Roor Closed in 2024

At the end of 2024, it became known that Roor had ceased production of its glass bongs in Germany at its previous location in Frankenthal under its previous company name (Vorsicht Glas GmbH). This decision was presumably not based on a lack of demand – on the contrary, Roor's products remained highly regarded and sought after until the very end.

There is much speculation about the exact reasons for the closure of production in Germany, and no one knows exactly why it happened. One thing is clear, however: the economic conditions for the production of high-quality laboratory glass are energy-intensive. Increased energy costs and other economic factors, as with so many craft businesses, represent an increasing burden for production in Germany.

It is important to emphasize that this decision changes nothing about the quality of existing Roor bongs. They are and remain testaments to craftsmanship – a standard that we at EHLE have pursued with just as much passion for decades. That is precisely why we want to honor them and therefore offer our EHLE repair service for Roor bongs.

EHLE & Roor – Shared Values, Shared Material, Shared Goal

Even though EHLE and Roor operated as independent brands in the market, there have always been many parallels and deep mutual respect. Both companies share a passion for the material glass and a commitment to the highest quality.

• Craftsmanship and Material: Both EHLE and Roor have always relied on high-quality borosilicate glass according to DIN-ISO 3585, which is meticulously handcrafted by experienced glassblowers. Precision, durability, and an optimal smoking experience are paramount.

• Quality and Design on Par: Even though EHLE and Roor took different paths, we are united by a passion for glass and the highest manufacturing quality. While Roor (Germany) and Vorsicht Glas GmbH are now saying goodbye, we at EHLE are not only continuing this tradition – we are developing it further. With over 36 years of experience, we not only look back, but also forward – for all those who value honest craftsmanship and durable products.

• EHLE as Preserver of the Scene: We at EHLE never saw ourselves as mere competitors, but as part of a community that values and wants to preserve the art of glassblowing and the culture of high-quality smoking devices. Therefore, it is a matter of course for us to step in where others – for whatever reasons – can no longer. We do this with the utmost respect for the achievements of Martin and his company and with all our expertise from the last 36 years.

Roor Bong Broken? How the EHLE Repair Service Can Help You

The news of the end of Roor production in Germany has unsettled many Roor bong owners: What to do if the precious item gets damaged? This is where EHLE comes in. Out of conviction and as a sign of our respect for the Roor brand and its loyal following, we are making an exception to our rule of not repairing third-party products. We want to help you preserve your valuable Roor bong.

What we can do for your Roor bong:

Our experienced team of glassblowers can professionally repair many typical damages to your Roor bong. These include:

• Replacing joints: A broken or damaged joint is often repairable, as long as the crack does not run deep into the glass body.

• Reattaching the base: For straight models, a broken base can often be reattached stably, provided the body itself is intact.

• Reconstructing the mouthpiece: A damaged mouthpiece can often be restored by cutting and reshaping or even by an extension.

• Loosening stuck joints: A service that we at EHLE offer free of charge if you bring or send us your bong.

How Roor repair at EHLE works:

1. Start a repair request: Visit our special repair page at t-ehle.de/kundenservice/reparatur/.

2. Fill out the form: Use the repair request form there. Please upload meaningful photos of the damage and describe the problem as detailed as possible. The more precise your information, the better we can assess the repair chances.

3. Review and feedback: Our expert team will carefully review your request and the images.

4. Individual offer: We will then contact you to discuss the repair options and, if applicable, make you a transparent and fair offer.

5. Secure shipping: After your approval, you send us your Roor bong – carefully and break-proof packed, please – to us.

6. Professional repair: In the EHLE glass studio in Limburg an der Lahn, your bong will be repaired by our experienced glassblowers with the greatest care and precision.

An important note on repair risk:

We want to be completely transparent. The repair of already damaged glass always carries a certain residual risk. Glass is under tension during processing and, despite all caution and experience, can unexpectedly crack or tear further. In this rare case, we unfortunately cannot assume any liability. Therefore, every repair is carried out at the customer's risk. But rest assured: We always do our best to save your darling! However, if your bong only fits in the dustpan in individual parts, we can usually no longer do anything. In most typical breaks and cracks, however, we find a good solution.

Note on the "Roor Authentication Seal":

The small seal with your individual identification number for Roor bongs, which was often located on the lower part of the tube above the base, unfortunately cannot remain on the pipe in this form if our Thomas repairs the bong. If you send a pipe with such a seal for repair, it will be carefully removed and placed in the package after the repair. A renewed 'installation' of the plastic shield is unfortunately not possible.

Why EHLE is the Right Contact for Roor Repairs

At EHLE, we combine over 35 years of experience in glassblowing with modern equipment and a deep understanding of the functional requirements of high-quality smoking devices. This makes us a competent and reliable partner when it comes to professionally repairing Roor bongs and preserving their quality.

Since we have always worked with borosilicate glass according to DIN-ISO 3585, we are just as familiar with the typical properties of the material as with the design features of many Roor models. Whether it's about renewing a joint, restoring a mouthpiece, or professionally attaching a base – our team knows what matters.

We are not only concerned with functionality, but also with aesthetics and value. Our repairs are intended to preserve the original appearance and at the same time ensure the longevity of your bong. In short: Your Roor is in the best hands at EHLE – with craftsmanship and respect.

FAQ – The Most Important Questions About Roor Repair at EHLE

Does EHLE really also repair Roor bongs, even though they are third-party pipes?

Yes, exceptionally and as a sign of respect for the Roor brand and its owners, we now also offer repairs for Roor bongs. Normally, we do not repair third-party products, but for Roor, due to the special situation, we make an exception to support the community.

What exactly can be repaired on my Roor bong?

We can fix many typical damages, such as broken joints, damaged mouthpieces, or bases on straight models. It is important that the main body of the bong is not too severely damaged. Simply send us a request via our repair form with photos!

How long does it take to repair my Roor bong at EHLE?

The repair duration varies depending on the damage and workload. After reviewing your request, we can give you a more precise time estimate. We always strive for prompt processing so that you get your Roor bong back quickly.

How much does it cost to repair my Roor bong at EHLE?

The repair costs are individual and depend on the damage and effort. After you have sent us a request via our repair form with pictures, we will assess the damage and provide you with a non-binding offer.

Will my collector's value be lost during a repair by EHLE?

Our goal is to achieve a repair that is as original as possible with high-quality borosilicate glass. A professionally executed repair by experienced glassblowers like ours can definitely restore the utility value of your Roor bong and often preserve or stabilize its collector's value.

What happens if my Roor bong breaks completely during repair?

As explained on our repair page, glass is under tension during repairs. Despite the greatest care, in rare cases, a total breakage can occur. In this case, we unfortunately cannot assume any liability. Every repair is carried out at the customer's risk.

How do I pack my Roor bong safely for shipping to EHLE?

Please pack your bong carefully and break-proof, preferably in several layers of bubble wrap and a sturdy, well-padded box. After we have received your request via the repair form and discussed the repair, you will receive all further information about shipping from us.

Does EHLE also repair chillums and bowls from Roor?

Whether the repair of accessories such as chillums or bowls is economically worthwhile must be examined on a case-by-case basis. For particularly rare, colored, or artistic parts, it can definitely make sense. Simply submit a request via our repair form!

What if my Roor bong is beyond repair?

If a repair of your Roor bong is no longer possible or economically viable, we will be happy to advise you honestly and transparently. Perhaps you will find a new favorite bong in our diverse EHLE range that convinces you with comparable quality and durability.

Why does EHLE even do that – repairing Roor bongs?

We see it as our duty and a sign of respect for a related brand and its loyal followers. Since Roor can no longer offer this service, we want to step in with our decades of expertise in glassblowing and help preserve these special and often cherished glass pieces.

Conclusion – Roor Lives On, with EHLE

Even though the Roor brand as a manufacturer in Germany no longer exists in its previous form, its legacy lives on in the many thousands of bongs that are in the hands of enthusiasts and collectors. And with commitment like here at EHLE, these valuable pieces can continue to live on even if damaged.

We at EHLE are proud to now be able to use our craftsmanship and experience to save your Roor bong and give it a second life. Because every high-quality bong – whether from the EHLE workshop or from other masters of their trade – deserves to be preserved with artisanal respect.

Has your Roor bong been damaged or needs a refresh?

Don't hesitate and submit a non-binding repair request via our repair form at t-ehle.de. We will individually see what we can do for you and your darling!

Should a repair no longer be possible, or you are simply curious about German craftsmanship from our house, then discover the variety and quality of our EHLE bongs and accessories in the shop.